2m*4mm HJ 38-2017 硅烷化总烃和GDX-502甲烷柱
产品名称:2m*4mm HJ 38-2017 硅烷化总烃和GDX-502甲烷柱
产品型号:2m*4mm
产品厂商:浩瀚色谱(山东)应用技术开发有限公司
简单介绍
2m*4mm HJ 38-2017 硅烷化总烃和GDX-502甲烷柱的详细介绍
HJ 38-2017 硅烷化总烃和GDX-502甲烷柱 详细信息:
名称:甲烷柱
甲烷测定柱,材质为不锈钢或硬质玻璃,长 2 m,内径 4 mm,内填充 60~80 目 GDX-502 或 GDX-104 担体,或其他等效填充柱
名称:总烃柱 总烃测定柱,材质为不锈钢或硬质玻璃, 长 2 m,内径 4 mm,内填充 60~80 目硅烷化玻璃微珠,或其他等效填充柱。
总烃 total hydrocarbons (THC)
指在本标准规定的测定条件下,在气相色谱仪的氢火焰离子化检测器上有响应的气态有机化合物的总和。
非甲烷总烃 no
指在本标准规定的测定条件下,从总烃中扣除甲烷以后其他气态有机化合物的总和(除非另有说明,结果以碳计)。
本标准规定了测定固定污染源废气中总烃、甲烷和非甲烷总烃的气相色谱法。
本标准适用于固定污染源有组织排放废气中的总烃、甲烷和非甲烷总烃的测定。
当进样体积为1.0 ml时,本方法测定总烃、甲烷的检出限均为0.06 mg/m3(以甲烷计),测定下限均为0.24 mg/m3(以甲烷计);非甲烷总烃的检出限为0.07mg/m3(以碳计),测定下限为0.28mg/m3(以碳计)。
HJ 38-2017 硅烷化总烃和GDX-502甲烷柱 测试谱图:






HJ 38-2017 Silanized total hydrocarbons and GDX-502 methane column
HJ 38-2017 Silanized Total Hydrocarbons and GDX-502 Methane Column Details:
Name: Methane column
Methane determination column, made of stainless steel or hard glass, 2 m long, 4 mm inner diameter, packed with 60-80 mesh GDX-502 or GDX-104 support, or other equivalent packed columns
Name: total hydrocarbon column Total hydrocarbon determination column, made of stainless steel or hard glass, 2 m long, 4 mm inner diameter, filled with 60-80 mesh silanized glass beads, or other equivalent packed columns.
total hydrocarbons (THC)
Refers to the sum of gaseous organic compounds that respond on the hydrogen flame io
no
Refers to the sum of other gaseous organic compounds after deducting methane from total hydrocarbons under the measurement co
This standard specifies the gas chromatography method for the determination of total hydrocarbons, methane and non-methane total hydrocarbons in waste gas from statio
This standard is applicable to the determination of total hydrocarbons, methane and non-methane total hydrocarbons in the waste gas of fixed pollution sources.
When the injection volume is 1.0 ml, the detection limit of this method for the determination of total hydrocarbons and methane is 0.06 mg/m3 (calculated as methane), and the lower detection limit is 0.24 mg/m3 (calculated as methane); non-methane total hydrocarbons The detection limit is 0.07mg/m3 (calculated by carbon), and the lower limit of determination is 0.28mg/m3 (calculated by carbon).
HJ 38-2017 Silanized total hydrocarbons and GDX-502 methane column Test spectrum:
相关产品
在线留言 |